Remotely connect to robot

    Hi everyone,

    I would need to help with connect Kuka robot. Now, I have new kuka robot KRC 4 with a version KSS 8.6. Is there any way to connect to the robot remotely? Any software? :smiling_face:

    I used Virtual Remote Pendant 1.1, but for this version (or newer) is not supported.


    Thank you for advice :smiling_face:

    Edited once, last by andy ().

    Or try RDP like in this post:


    Thread
    Remote Desktop on KSS 8.6
    Hello

    Is there any differences between remote desktop connection procedure on KSS 8.6 and KSS 8.5?

    I'm trying to connect the PC via RDP to Kuka controller with KSS 8.6.7, wich has the default IP 172.31.1.147 through the KLI interface.
    So I can access the shared folder on Kuka from my PC, I can ping it, I can connect it with WorkVisual, but the RDP is not working. Maybe there are some additional settings (except IP setting of course) on Kuka wich has been added in 8.6?

    I also have the robot with KSS…
    RainerFord


    or open port 5900 and use VNC


    Keep in mind that jogging the robot like with Virtual Pendant is not possible with above options.

Advertising from our partners