Hello guys, Does the motors on IRC5 suffer the high temperature of the environent?It is to hot those days and two IRC5 are having problems specialy on the positioner,strange noises and sudenly hard shaking .Foes anybody have similar problems.Thanks
IRC5 servo
-
Enio -
June 4, 2022 at 6:09 PM -
Thread is Unresolved
-
-
Make sure that the brake release is working.
-
In my experience, Lemster68's brake issue is the most common >>> 24V brake voltage missing, intermittent, or too low.
Others are bad bearing in motor, improper grounding, interference in resolver signals, lack of lubricant in the gear reduction.
-
Thanks Guys, I eill check