There should be a coax connector, can't remember where exactly but keep looking.
You are missing the connector
Look at this picture
That's not good. I think Fanuc has stopped shipping them prepared for vision due to supply shortages. You will need to contact them and get a new main board. Or go with GigE
That's not good. I think Fanuc has stopped shipping them prepared for vision due to supply shortages. You will need to contact them and get a new main board. Or go with GigE
Ok which model for gige camera can use ?
My mean fanuc gige
You need to make sure you have the correct software option and purchase the Basler camera. Or talk to Fanuc on purchasing the cxv system, or use a 3rd party system and comm protocol to send results.
You need to make sure you have the correct software option and purchase the Basler camera. Or talk to Fanuc on purchasing the cxv system, or use a 3rd party system and comm protocol to send results.
Would you please let me know which options should be installed for useing basler gige camera and irvision
I want to use irvision with basler camera for VGR
There are a lot of different options. What are you trying to do?
Call your Fanuc rep and ask for a quote for Irvision 2d guidance with GigE camera package.
You need to be a member in order to leave a comment
