camera for R-30iB mate plus

    Dear freinds

    Hi

    The Controller is R-30iB mate plus

    I want to know the part number of fanuc camera support to this controller .

    i don't have GIGE option license for basler camera.

    before that my controller has BNC connector for CXV camera but in this controller i don't have any

    please find attach file for hardware

    Many thanks

    You are missing the connector


    Look at this picture

    Thread
    GIGE camera for r-30iB mate plus
    Hi
    Dear My friends,

    The Controller is R-30iB mate plus , has one port for CVX digital camera for pick & place (coaxial cable)and irvision option work with that as well, but i need to connect GIGE camera to controller for flaw detection after pick up the piece.
    Would you please instruct me and reply bellow items.

    - I don't know which port is use for GIGE camera (as attach file)
    -Every gige camera can connect to fanuc robot or special brand and model ?
    - How can i check my controller has it this option…
    h.esk60

    Retired but still helping

    Quote from HawkME

    That's not good. I think Fanuc has stopped shipping them prepared for vision due to supply shortages. You will need to contact them and get a new main board. Or go with GigE

    Ok which model for gige camera can use ?

    My mean fanuc gige

    You need to make sure you have the correct software option and purchase the Basler camera. Or talk to Fanuc on purchasing the cxv system, or use a 3rd party system and comm protocol to send results.

    Quote from HawkME

    You need to make sure you have the correct software option and purchase the Basler camera. Or talk to Fanuc on purchasing the cxv system, or use a 3rd party system and comm protocol to send results.

    Would you please let me know which options should be installed for useing basler gige camera and irvision

    I want to use irvision with basler camera for VGR

    The options need for showing the basler camera in irvision and can VGR with robot
    My mean pick& place

    the robot find piece as simple by basler camera and irvision software


    many thanks

Advertising from our partners