This morning I've tried to configure a BALLUFF IO-LINK Master BNI005H with KUKA. I used to do it a few years ago without any problems. Now the devices connected to the master are not recognized correctly... wich is completly unexplicable to me. Here a qiuck recap of the configuraton.
KSS 8.3.38
Profinet KRC-Nexxt (V3.3.1)
Master FW 3.3
GSDML-V2.34-Balluff-BNI-PNT-508-105-Z015-20190301.xml
Port 0 BNI0087, 1 Input Byte
Port 1 BNI0006, 2 Input Bytes
Port 2 BNI004L, Input + 2 Output Bytes
Port 3 BNI0006, Input Bytes
Port 4 BNI006P, Output Bytes
Port 5 BNI007Z + BNI006P, 2 Input + 8 Output Bytes
Port 6 BNI004L, Input + 2 Output Bytes
Port 7 BNI004L, Input + 2 Output Bytes
I've attached also my project and the GSDML
As you can see some devices are correctly recognized but other not...
