Hello,
My employer asked me to find out how to release the brakes on our 410iC unit we sent out for repainting. I replied with the part numbers of the brake release unit sold by Fanuc. They didn't buy it of course and now they need the robot repositioned ASAP in the paint shop without power. Has anyone here ever rigged up their own release unit? I looked through the service manuals and found the pins for the brakes and applied 24v to them but the brakes did not release. I am aware the arm will fall immediately once the brake is released. We have it rigged up to support and move it. I also read some other posts online that mention 90vdc for the brakes, but the manuals for this one say 24v. Any help is appreciated!