OfficeLite Using EXT mode

    Hello


    We have a case, where the robotic cell runs in ext automatic mode and it uses the KRC4 itself as the external PLC (some DO's connected to DI's to make it work) The logic is very simple and we need to run the cell with some external buttons without smartpad.

    Anyway, the real cell works pretty well, but I wonder if I can simulate the case like this in Office Lite? As I know, it is impossible to turn on the EXT mode in OL.

    Also, Is there a way to simulate input and output signals in OL in Auto mode?


    We are using the KRC4 with KSS 8.6.8 in this case.

    you can select EXT mode in OL without problem.

    you will have more difficulties with enabling drives and issuing start.

    1) read pinned topic: READ FIRST...

    2) if you have an issue with robot, post question in the correct forum section... do NOT contact me directly

    3) read 1 and 2

    Just rechecked all user rights then made a cold start. So now the EXT mode works. And in case of someone interested in signal emulation too: I tried to use Y200. Seems to be not bad,despite the fact that there is no opportunity to comment the signals.

Advertising from our partners