Hi Guys,
I am new to the world of Yaskawa Robots.
We have a DX200 controller with MH00024-A0 Robot.
The controller is running DN.3.11.00 (Chosen when loading back to Motosim) version of the robot software.
I have taken a backup of the robot and loaded it onto MotoSimEG-VRC Ver2021SP1 but I can't see the ethernetI/P Setup screen on Optional Functions.
I can see the ETHERIP.DAT file on the back but it's loading for reason.
Am I missing a trick here?
This is the information from SYSTEM.SYS File:
/SYSTEM 7
//DATE : 2022/02/16 11:53:37
//SYSTEM NO : DN2.80.00A(JP/US)-00
//PARAM NO : 2.38
//APPLI : GENERAL
//LANGUAGE : 2.80-00-00, 2.80-00-00
//REVISION
YCP21 2.80.00,-----,
YPP 2.33-00, 1.03-00, 2.03
YSF21-1 2.61-00, 2.00,
YSF21-2 2.61-00, 2.00,
EAXA*#0 2.60-00, 2.00,
YSF25#0 CPU1 2.50-00, 1.03, CPU2 2.50-00, 1.03
//ROBOT NAME
R1 : MH00024-A0* 0011_1111
//CONTROL POWER
TOTAL : 2019/05/23 08:41,19456:46'48
//SERVO POWER
TOTAL : 2019/05/23 08:41,17140:31'11
R1 : 2019/05/23 08:41,17140:26'42
//PLAYBACK TIME
TOTAL : 2019/05/23 08:41,03253:44'22
R1 : 2019/05/23 08:41,03249:15'38
//MOVING TIME
TOTAL : 2019/05/23 08:41,02327:57'24
R1 : 2019/05/23 08:41,02327:57'24
//OPERATING TIME
TOOL1 : 2019/05/23 08:41,00000:00'00
//ENERGY TIME
TOTAL : 2019/05/23 08:41,06197:06'59
According to the manual, Ethernet Function can be activated from this window. but it's not there.
Am I doing something wrong here? Please Hep.....