Hi guys,
I'm looking for a pulley kind gt2 idler pulley double head enough long (between 35mm and 40mm), the only one i see in the market is double head with length 27.5mm.
Any ideas?
Thanks
Hi guys,
I'm looking for a pulley kind gt2 idler pulley double head enough long (between 35mm and 40mm), the only one i see in the market is double head with length 27.5mm.
Any ideas?
Thanks
So you have a belt with more than 6mm, or the two pulleys must have a bigger distance?
What about putting two seperate pulleys on one axis?
I have belt of 6mm, i need a bigger space between the 2 pulleys.
If i put 2 separate pulleys the motion will be separated because the axe should be fix (not moving).
I would like the movement of one pulley to drive the other.
... the axe should be fix (not moving).
Not a good idea, those pulleys are only aluminum, no brass bearing or something similar. So they will be worn out very fast.
They should be fixed on a turning axis.
Not a good idea, those pulleys are only aluminum, no brass bearing or something similar. So they will be worn out very fast.
They should be fixed on a turning axis.
Hmm, good to know. What about if the pulleys are in metal?