Auto logout time of "The logged-on user switched from Administrator to operator"

    Can anyone tell me if you are still able to change the User Level auto logout time KSS 8.6

    My readings tell me the older KSS versions had it in Authentication .Config but that doesn't seems to exist in my project.

    I am only looking at a work visual backup as my robots have not arrived so please excuse my ignorance if this is something that needs to be done with the controller in hand or online.

    I won't help those who won't help themselves

    that is one of many KSS files that are not a part of the project. you need to look at the controller or KRCDiag for example

    1) read pinned topic: READ FIRST...

    2) if you have an issue with robot, post question in the correct forum section... do NOT contact me directly

    3) read 1 and 2

    1. Login to UserGroup Expert

    2. Open file C:\KRC\SmartHMI\Config\Authentication.config

    3. At approximately line 10 and 14 change the values of the LeaseTime to 0 or extend to desired timeout value. A value of zero (0) will prevent logout due to timeout. Otherwise, the value is in seconds.

    4. <LeaseTIme>300</LeaseTime> to <LeaseTime>0</LeaseTime>

    5. Save and close the file.

    6. Cold Boot the controller

Advertising from our partners