Auto logout time of "The logged-on user switched from Administrator to operator"

that is one of many KSS files that are not a part of the project. you need to look at the controller or KRCDiag for example

you will find it in c:\KRC\SmartHMI\Config\

1. Login to UserGroup Expert

2. Open file C:\KRC\SmartHMI\Config\Authentication.config

3. At approximately line 10 and 14 change the values of the LeaseTime to 0 or extend to desired timeout value. A value of zero (0) will prevent logout due to timeout. Otherwise, the value is in seconds.

4. <LeaseTIme>300</LeaseTime> to <LeaseTime>0</LeaseTime>

5. Save and close the file.

6. Cold Boot the controller