Hi all,
I have this problem:
In automatic production, the window change from production window(where u see the line the proc corrently at) to operator window. Every time this happen, and i need to stop the program, i cant start it again without changing the key mode from auto to manual mode in the eletric cabinet.
In the operator window i dont have the usualy option to the key reg "start".
This happens everytime i use some tpwrite/ tp erase.
Is there somekind of tric to change me always to the production window?
Pics in attatch show the prog running like normal, and after some tperase without the reg key "start".
Thanks in advance!!