1st at all , sorry for my bad english.
But I have a few questions if there is somebody who have a better knowledge about the integrated force control.
1. So we are using IRB 2600 robot with ABB force controller for grinding. Does force control understand the weight of tool what we are using for grinding or do i have to create Load data and put the weight of our tool to this load data or do i leave it to 0.1kg (I assume you need to have some kind of mass in load data). I mean the weight of our tool is in ToolData already. Basicly we dont add anymore load but im curious can this force control understand the weight what we use in our tooldata and in our current tool or do i have to do it seperately.
I dont know can you guys understand what im trying to say but atleast I tried
What im trying to figure out if I have 4.5kg in tooldata for the tool what we are using and 4.5kg in loaddata for force sensor, does it understand this like " Okay so we have 9Kg load"
Im gonna try to do example below:
Tooldata:
toolGrinder, Mass 4.5kg etc etc
LoadData:
loadGrinder, Mass 4,5kg etc etc
FcCalib loadGrinder;
or
Tooldata:
toolGrinder, Mass 4.5kg etc etc
LoadData:
loadGrinder, Mass 0.1kg etc etc
FcCalib loadGrinder;