Hello everyone Tell me, I'm new to Fanuc robots, I had experience only with Kuka. The robot travels 90 degrees relative to the camera. The bases have already been set in different ways, what can be? Everything works fine in the simulation, but not on the robot itself.
IrVision
- coolvitaly
- Thread is marked as Resolved.
-
You haven't said what your problem is.
-
You haven't said what your problem is.
We have already decided, thank you! The robot drove relative to the camera at 90 degrees. The problem was that when training the camera, you first need to set one base, and when the camera is being calibrated, then the same base as the robot.
Advertising from our partners
