Hello all,
KSS 5.6.2
PROFINETIO V2.3.4
CP1616 card: 6GK1 161-6AA01
project:
S7-1200: Controller
CP1616: Device
1. I installed PROFINET driver successfully and now i can see dummy driver in computer management.
2. in pnioDrv I changed Enablecontroller to 0 and Enabledevice to 1
2. in first step I didn't install the card and I had this error "Configuration error I/O driver PNET"
3. I Installed the card and i connected LAN cable of controller to the "LAN only" port of the card (this port has green led and blinking yellow LED), In KRC "I/O Driver Configuration " window, PNET changed to red circle that means driver is active. I have no error for configuration, although PLC still is disconnected!
can I conclude from "STEP 2 and 3 " that KRC can see the card without any problem and they are compatible?
condition of two LED on the card:
SF: red LED without blinking
BF: red LED slow blinking
I connected PLC to the card but TIA portal can't see the card at all. I think before connecting PLC to the card i must solve "SF" red LED by card reset or something like that!
can anybody help me please!