Using IP to see Programs

  • I Have a station that has 6 robots in it and I put the IP and router information into all of then but 2 of them I can not get on there web server to view the robot though the IP address. Now the 2 that this is not working for have values in the RIPE screen where the other 4 do not have anything on this page. I'm assuming that is is the issue but I'm not sure what the RIPE SETUP page is actually being used for? as far as I am aware the robots are all communicating in the same way. The IP address in the TCP/IP settings all look good but will not connect to a webpage.

    Does anyone have any ideas? what the Ripe settings are and would they keep me from using the Web browser??

  • a good idea would be to share some details such as robot brand, how things are physically connected, how each station is configured (network settings) etc. short of that, try google.

    1) read pinned topic: READ FIRST...

    2) if you have an issue with robot, post question in the correct forum section... do NOT contact me directly

    3) read 1 and 2

Advertising from our partners