Hi guys,
The I'm using a MotoMoni with a YRC1000micro controller, when I start up, the teach pandent enters maintenance mode. How can I get rid of it?
YRC1000micro enters maintenance mode each time start up
-
Zed -
January 10, 2022 at 8:18 AM -
Thread is Unresolved
-
call your local representative. is the best and quick solution.
Br
-
Are there any alarms? Generally, when a controller boots up in maintenance mode automatically it means the memory has been wiped. This could be due to a dead battery in the controller. It could be a stuck Main Menu button on the pendant, assuming it has the standard pendant.
Go to SYSTEM then VERSION. In this screen you should see the application, like GENERAL, and the model of robot attached. If there isn’t anything list the memory has been wiped. Reload a cmos.bin file if you have one if not call Yaskawa.
-
check that main menu keypad is pressed or not, if it will pressed continuously then always you go on maintenance mode.
try with other teach pendent.
Advertising from our partners
