Hello,
Has been successfully done clean Windows XPe 2.2 and KSS 5.6.12 installation.
Remains the message / request for mastering of all robot axes.
Due to the fact that the robot has not been mechanically serviced or else that will provoke misalignment with the previous mastering data, I want to ask which is the reason of the new mastering request after the OS and KSS installation ?
Will be correct, if the robot is placed to 0.0000° rotational position of all axes and to be mastered without mastering tool, keeping the above mentioned fact that the mechanical change has not be performed at the robot, during OS and KSS clean installation ?