You may want to call Yaskawa but if I remember correctly you can only use 128K on the NX100
Sure you can use bigger. Yaskawa said maximum was 10 Gb, I believe. I use a 1 Gb all the time. I’ve never tried bigger since back when NX was out CF cards that big were very expensive.
I use a 2GB card regularly without any problem. Have used the same card for 10-11 years, occasionally format it and last time was on Windows 10 as FAT32 and still works just fine with our NX100's.
don't format a CF card in a Windows based computer. The robot does not really work in "FAT" format and will never understand NTFS.
I have used a 1Gb Trascend industrial CF all this time, with a Hama converter (00055348). I format this card on win7 in fat32 and it has always worked with a NX100.
Even in a Fanuc RJ3 from early/mid 00s
don't format a CF card in a Windows based computer. The robot does not really work in "FAT" format and will never understand NTFS.
It's always worked just fine for me Doc...
