Hi, I'm new at roboguide.While my program was running, the gripper picked the part of the machine, and the parts in roboguide were disappeared. (Please forgive me if I make any errors. My English is pretty basic.)

I want to know why my machine in robotguide is disaapeared。
-
monred -
November 2, 2021 at 3:23 PM -
Thread is Unresolved
-
-
To my dear mornred, I also want to ask about this part, if I have new information, I will leave a message 👍👌👌
-
Are there other masters? Please help us (┬┬﹏┬┬)
-
Hi monred
welcome to the robot forum
Your part, belongs to a fixture. Check on the fixture small window,select Parts tab and check how your parts work when you are running auto
-
Thanks for your help, but that is not the point. My problem is that my parts with their machine disappeared bizarrely when I running auto.
-
I finally fixed my problem, after I changed the path of the machine. It is all fine.