First off thanks for any and all help! This is my first time building something like this so could use lots of input.
I'm building a 6x6 crawler with go pro mounted to inspect home foundations, I will also need lighting.
So I bought the wild thumper platform. It has the motors but no other electronics yet. https://www.robotshop.com/en/d…-all-terrain-chassis.html
I will need recommendations and some pointers for all parts needed to build this project.
Motor controller
Transmitter
Reciver
battery- would like to use a Dewalt cordless battery if possible. Would I need a voltage regulator?
I already have a pan/tilt servo for the camera mounting. Does this just wire to the receiver?
lighting options? I see they have RC led light bars, would it be best to wire to direct power on a switch and regulator?