Starting up new YRC1000 Need to know how to set my Allen Bradley PLC Ethernet IP address so the robot will look at it?
My Robot IP is set to 192.168.0.5
My AB PLC is set to 192.168.0.2
On the studio 5000 side, I have the generic ethernet module setup with the robot IP (192.168.0.5) in it. 8 bytes for inputs and 8 bytes for outputs. Instances all setup as well.
But I do not know where to set the AB PLC IP address in the teach pendant? (I am assuming it is called host ip?)
I am getting this on the AB studio side.....Faulted module
Any help will be greatly appreciated.