I have a client KRC2 ed05 running KSS 5.4.11. I have re-installed the KSS from the D:ISO to what I believe are the default settings.
For some reason the LeaseTime options that I have in the KRC/HMI/Config/Authentication.config file are not working.
It's as if the Authentication.config file is not being addressed.
Observation of tests:
I change the <CanLockSystem>false</CanLockSystem> to true (which should lock the screen after the Lease Time) and then try out the below and then change the <CanLockSystem>false</CanLockSystem> to false (which should allow the HMI to revert to the Default user after the Lease Time).
I do a cold start after each change.
If after each boot I login as Expert and wait the desired time (120 Seconds) there is no change if I change the mode switch on the teach pendant or if I wait more than 2 minutes (120S).
I have attached the Authentication.config file for reference.
Am I missing something.