SYST-005 UOP is the master device

MoEL · August 24, 2021 at 10:28 AM

Hello everyone,

I'm a beginner to this and need your help to run a simple program in Auto.

Code

LBL[1]
J P[1] 20% FINE
J P[2] 100% FINE
JMP LBL[1]

When trying to run this simple program in Auto I get the next error Messages.

SYST-011 Failed to run task

SYST-005 UOP is the master device

For now I want to be able to run it with the Start Button in the Controller Cabinet, but later with the Siemens PLC.

How can I do that?

Thank you very much

MoEL · August 24, 2021 at 10:38 AM

I found the answer for Local Run thanks to hermann

How about remote, from Siemens PLC?

Thank you

neighbour1 · August 24, 2021 at 6:21 PM

You can also change:

1. Remote Local setup -> Local.

2. Enable UI signals = FALSE

3. T1/T2/AUTO switch -> AUTO,

and then select your program from TP, TP = OFF, press reset from operator's panel ot TP, then Cycle start from operator's panel.

Then it's working.

Advertising from our partners