Hi Everyone,
Has anyone ever used IFM Al 1122 with Fanuc Scanner?
I think my problem is parameters entered manually on teach pendant from eds file.
I can ping the device from teach pendant.
Thanks in advance.
IFM AL1122 IO-Link and Fanuc Scanner Configurations
-
Tran21 -
August 23, 2021 at 8:53 PM -
Thread is Unresolved
-
Hey, I'm quite curious if you have been able to solve your issue ? How did you make it ?
-
Here is what I used for a AL-1322. Your input/output sizes will have to match your hardware setup. You're assembly instances will also be application specific.
They really are very nice I/O modules that are well priced, robust, and easy to work with.
-
Yes I work with them on AB. Quite easy to integrate. I would like to use it on a project where I dont have a PLC on it. I want to try it to retreive a value of a keyence laser.
-
just to bump this topic, lets say i have a laser distance sensor connected through the io link, how can i read the distance value and used it in FANUC TP program? the distance value is taking up two bytes.
Is it that i need to setup at Analog Input /Output or I can only access through DI/DO? -
Use group inputs.
-
Interestingly, Vendor Id, Device Type, Product code all set to 0s and it worked.
Sorry for the late reply.
-
Thanks for this info! FYI I can confirm that pdl's screenshots work nicely on a Yaskawa YRC1000 connecting to an AL1122 as well.
Advertising from our partners
