Fanuc Robot and Siemens PLC 1500

For the Molex Option you can get the GSDML file directly from Fanuc. Or write me a PM, but I'm out of the office at the moment.

Hello friends,

I need help with a gsd file. Im trying to upload the code from a S7-1500 but during the process the upload stop and show an error related with a missed gsd file "fanucrj3.gsd". I asked to Fanuc about the gsd files and all of them has been installed but when I try the upload, TIA Portal Keeps showing the error. If someone could help me with this upload I will be grateful.

Thanks.

Quote from MoEL

Thank you very much

I get the GSDML from Fanuc and the procedure document,

And now, everything works fine

Thank you all for your time

hello i have the same error in my installation, can you help me with the gsdml fanuc send you ?
pls. 🙏

Which PROFINET option do you have, Molex, Siemens or FANUC?

Quote from DS186

Which PROFINET option do you have, Molex, Siemens or FANUC?

motherboard A20B-8101-0930 and profinet Molex

Quote from osval

hello i have the same error in my installation, can you help me with the gsdml fanuc send you ?
pls. 🙏

I can send you GSDML’s that I receive last month from Fanuc, if you still need