Variable $USEUFRAME is missing from System variable list

    Hey,


    My problem is that I can't save a position in the active user frame, the position saves by default in user frame 0.

    There is a variable that causes it and its $USEUFRAME, but I just cant find it.


    Thank you for your time and help!

    Hi Ruts

    Welcome to the robot forum


    Please, before you do any you are going to regret, do a image backup

    Did you try to see the variable under Controlled Start ?


    I would be nice if you give us the controller type, software version, etc, so people might have more tool to help you

    Retired but still helping

    Hi Fabian,


    Sorry for the lack of information, I wrote it in a hurry.


    Controller: RJ2

    Software Edition No. V4.30P/B6


    I just checked under Controlled Start I could not locate it.


    Thanks for your reply!


    Edit:


    There was a same problem posted here by another user, but the thread went cold.


    Posts:

    Can't Program in an active user Frame

    Missing $USEUFRAME from variable list


    I contacted the user directly to see if they solved it, but so far no response.

    Thanks for the suggestion, but I have already set the frame that way.


    I read from a manual that the $USEUFRAME is not a standard option, that means it has to be installed separately. So I guess that answered my question. :upside_down_face:

Advertising from our partners