Cannot run a Program in the robot from a higher-level controller. (Automatic External)

    Hello.

    I cannot run a Program in the robot from a higher-level controller. (Automatic External)

    I have configured the mapping.

    1) Edited the cell.src file.

    2) I added the programs I needed (I created an additional directory inside the programs folder).

    I set the start signal from an external controller, the program does not run.

    In T1 mode the program is running.

    How can I find out what else is missing to start the program from the external controller?

    Thank you.


    Translated with http://www.DeepL.com/Translator (free version)

    you mean cell was not selected.

    btw listing external programs via "EXT prog()" at the top is not required. it was not needed for many years.


    1) read pinned topic: READ FIRST...

    2) if you have an issue with robot, post question in the correct forum section... do NOT contact me directly

    3) read 1 and 2

Advertising from our partners