KSS 5.5.12
EIP 2.1.0
Hi,
Board Intalled on PCI1;
EIP Installed on robot controller;
IOSYS Configures;
IP OK;
IO Size ok;
PLC parametes ok;
I am installing a KUKA EIP board, I have alredy configured the board using KUKA EtherNet/IP Console, but I have an Error: KSS 8096 EIP: Device 1 not ready, STATUS 33.
I check the manual and tryed to do all solutions but it not works.
I am able to ping the board but is not possible to change data.
