Profinet communication with krterm

They are 2 different protocols.

All Kawasaki Controllers require a profinet interface card, usually HMS Anybus.

With F Controller you will need an HMS Anybus CompactCom M40 Module.

Try it then and see if it works.

Kawasaki Controller uses standard telnet port 23 for terminal editor communication.

Alternatively, just have a bluetooth dongle plugged into the inside of the F Controller and use KRTerm.

This information is available in the option and communications manual.

I'm not surprised by that.

I think the F Controller (internally) uses a dedicated 16 bit IO data bus to communicate with the anybus module (PCMCIA).