Hello,
It is possible to connect with Krterm by profinet interface? F controller
Hello,
It is possible to connect with Krterm by profinet interface? F controller
They are 2 different protocols.
All Kawasaki Controllers require a profinet interface card, usually HMS Anybus.
With F Controller you will need an HMS Anybus CompactCom M40 Module.
Thanks for your answer,
We have Profinet interface card and want to connect krterm via this profinet card not by front controller panel
Try it then and see if it works.
Kawasaki Controller uses standard telnet port 23 for terminal editor communication.
Alternatively, just have a bluetooth dongle plugged into the inside of the F Controller and use KRTerm.
This information is available in the option and communications manual.
Connections by telnet port 23 doesn't work via profinet interface, it may not possible to connect krterm via profinet interface
I'm not surprised by that.
I think the F Controller (internally) uses a dedicated 16 bit IO data bus to communicate with the anybus module (PCMCIA).