Loading .PC file to robot

Hi,

I have a LR Mate 200ic/5L with an R-30iA Mate controller.

I made a backup of the robot and created a new workcell in handling pro.

I was modified a kl file that we had, and compiled it in handling pro to get a .PC file. When i tried to load the .PC file in the controller, it said that it's loaded but i can't find it in the program list when i press [SELECT].

I'm new to fanuc robot and i can't find anywhere what's the problem.

Thanks

Edit: I do have R632 and R567 option in the controller

Quote from jmd2777

It might just be filtered out of the list. When you are on the Select screen, try pressing F1 [Type]. Then select KAREL Progs.

I tried to filter just [KAREL prog] file then check with [ALL] type and it's not there.

Quote from jmd2777

Hmm, how did you load the program to the robot? Did you do it over the network by exporting in Roboguide? Or did you copy to a USB drive and then load on the robot?

I'm using a CompactFlash SD card (see attached jpg).

When i'm in the file menu, i press [UTIL]->[Set Device]->[Mem Device (MC:)] to access the content.

I can see the pc file and load it, but it's not showing anywhere else.

Ok,

One of my collegue just found the problem, I changed the name of the file but not the name of the program in the file, so i was just overwriting the old already existing program .