Ok, so this is a new one.
I have a client that wants to be able to load TP files into an RJ controller via a serial communication through the Floppy Disk connection...
Has anyone been able to do this? Is this even possible?
RJ Controller - Load TP
- ClaudiuA
- Thread is Unresolved
-
That is the purpose of the KFloppy software. I know it works on RJ2. You must have the correct cable and a windows XP computer.
-
Kfloppy works with RJ robots as well, I do it almost every day…
Search the site, there is a link on the site where you can download kfloppy.
-
Kfloppy works with RJ robots as well, I do it almost every day…
Search the site, there is a link on the site where you can download kfloppy.
Funny enough, I have KFloppy as a piece of software that I inherited from the robot programmed before me. I simply never had need for it. Thank you both for the info.
-
Although it been a few years, it also works on R-H. For R-H, toggle off the Large Transmit Buffers in the Emulator settings.
Toggle off the Log messages too.
Advertising from our partners
