DEAR
I'm new at this forum
i have a kawasaki ux 120 c controller with MFP pendant .
i have a white screen in the pendant after try to initialise the controller for moove te robot
let me if somebody can help me to reboot my mfp ?
THANKS
RONALD
kawasaki ux 120
- CGBS
- Thread is Unresolved
-
Welcome to the forum............
Can you provide answers to the following:
- Image of inside of controller and rating plate.
- Status of controller before problems occurred - was it running ok, error free.
- What was last thing that happened before problem occurred.
- Can you confirm ALL harnesses internal and external are of good connection and secure.
- What specifically you have done to rectify problem - include ALL details.
- Have you access to spare parts.
- Do you know how to use KRTerm/KCWin32 app and connect PC to controller.
- Do you have controller file save - ie controller data backup before problem occurred.
- What is your current experience with Kawasaki.
-
the fisrt time i have run the controller, i have sea error (1800) AC POWER OFF with a keyboard in the MFP screen only
I have read in this forum how resolve this problem with initialisation procedure
1. Can you explain where you read in this forum the procedure to resolve this?
2. Can you provide images of inside of controller?
3. Do you know status of batteries inside controller?
4. Do you have any data sheets supplied with controller when you purchased it?
Without backup, there is no way to recover controller to as you received it, it will require reconfiguring.
-
Please answer all questions:
1. Can you explain where you read in this forum the procedure to resolve this?
2. Do you know status of batteries inside controller?
3. Do you have any data sheets supplied with controller when you purchased it?
4. Locate red dipswitches and set 1 and 8 to ON and power controller up - post image of MFP display?
Advertising from our partners
