DEAR
I'm new at this forum
i have a kawasaki ux 120 c controller with MFP pendant .
i have a white screen in the pendant after try to initialise the controller for moove te robot
let me if somebody can help me to reboot my mfp ?
THANKS
RONALD
DEAR
I'm new at this forum
i have a kawasaki ux 120 c controller with MFP pendant .
i have a white screen in the pendant after try to initialise the controller for moove te robot
let me if somebody can help me to reboot my mfp ?
THANKS
RONALD
kawasaki ux 120
kawasaki ux120
Welcome to the forum............
Can you provide answers to the following:
- Image of inside of controller and rating plate.
- Status of controller before problems occurred - was it running ok, error free.
- What was last thing that happened before problem occurred.
- Can you confirm ALL harnesses internal and external are of good connection and secure.
- What specifically you have done to rectify problem - include ALL details.
- Have you access to spare parts.
- Do you know how to use KRTerm/KCWin32 app and connect PC to controller.
- Do you have controller file save - ie controller data backup before problem occurred.
- What is your current experience with Kawasaki.
Dear KWAKISAKI
Thank you a lot for reply
this is a used kawasaki weldind robot use by jaguar company
the fisrt time i have run the controller, i have sea error (1800) AC POWER OFF with a keyboard in the MFP screen only .
I have read in this forum how resolve this problem with initialisation procedure ,i try to do this ,but i have forget to backup the original file
YES i confirm you all harness internal and external are of good connection and secure
yes i have access to spare parts
yes i have KRTEM/KCWIN32 APP but i try to connect my pc to controller ( i need help )
sorry but i don't have file save
this my thist experience with kawasaki robot
the fisrt time i have run the controller, i have sea error (1800) AC POWER OFF with a keyboard in the MFP screen only
I have read in this forum how resolve this problem with initialisation procedure
1. Can you explain where you read in this forum the procedure to resolve this?
2. Can you provide images of inside of controller?
3. Do you know status of batteries inside controller?
4. Do you have any data sheets supplied with controller when you purchased it?
Without backup, there is no way to recover controller to as you received it, it will require reconfiguring.
PICTURE
PICTURE 2
PICTURE 3
PICTURE 4
PICTURE 5
Please answer all questions:
1. Can you explain where you read in this forum the procedure to resolve this?
2. Do you know status of batteries inside controller?
3. Do you have any data sheets supplied with controller when you purchased it?
4. Locate red dipswitches and set 1 and 8 to ON and power controller up - post image of MFP display?
PICTURE 6
PICTURE 7
I have read this procedure in this forum but i hae forgot to backup this file
i have check the batterie in the controller is good : 3.5 v by inch
i have jaguar paper only
ok do this and back you
jaguar pp 2
jaguar pp3
jaguar pp4
i have set 1 and 8 to on , but it mfp screen is always white
set 1 and 8