Need help please.
After inserting package to controller, an error message below appeared.
Please let me know what could be the problem.
Transfer failed.
The local station configuration is not the same as the one on the controller.
Either adjust the local station configuration and reinstall the station configuration, or load a project from the controller and accept the station configuration from the controller.
More information on the differences can be found here.
Topology Element 'KAKU_Sunrise_Cabinet_1': The selection of software elements is different. The following elements have been selected for one of the configurations only
Ikarus AntiVirus Definition Files(v.99244)
Ikarus AntiVirus(v.2.7.30)
Ikarus AntiVirus SmartHMI(v.1.8.0)
Ikarus AntiVirus Service(v.1.15.0.5)
com.kaku.service.virusScanner.ncf(v.1.15.05)
Thank you in advance.