Sometimes roboguide point to the wrong line. Have a look onto the line before, exists there the semikolon at the end?
Hi
Welcome to the robot forum
That's a very common logic line you wrote, I write those continuously on newer versions
Create another cell with a newer version , even a V7.4 ad see if it works
Hi
Welcome to the robot forum
That's a very common logic line you wrote, I write those continuously on newer versions
Create another cell with a newer version , even a V7.4 ad see if it works
Tnx.
Newer version works indeed.
I am still required to use v6.31 roboguide project, which is created from v6.31 physical controller backup, and use v7.4 separately to build those pieces of code?
You might have to break up the equation. Do the division on one line and store in a register, then do the subtraction in a second line of code.
You have a parenthesis mismatch in your mixed logic. the PR[40,2]-R[10] should be in parenthesis, then divided by 2. Should look like this...
PR[6,2:ORG]=((PR[40,2:START_1]-R[10:LENGTH])/2)
