UR & Cognex

    Hi all,


    I am currently working on UR5 CB3 robot and my target is to 2d pick random placed parts on a table.


    The camera is generation 1 cognex is7200-11 running on 192.168.1.60-port 3001, the robot is running on 192.168.1.1, external IO modbus is on 192.168.1.2 and laptop on 192.168.1.20 all going in to 5 ports switch. I have downloaded the “universal script” and tried to adjust it, but I am having issues with receiving the data (my program is just looping in section where is trying to read the string from camera).

    https://www.universal-robots.c…on-system-with-the-robot/


    (my program is exactly same apart from IP address, port.)


    I used “socket test” program on my laptop to see what data is coming from camera ( all correct: X,Y and angle).


    Can anyone give me advice or point me right direction please?

  • massula

    Approved the thread.

Advertising from our partners