Profinet R-30iB Plus

    Hi,

    first time i'm using Profinet with CP1604 card with R30iB+.

    I don't have any led lit or flashing when I plug the Ethernet cable with my PC.

    What is the first steps to make it work?


    The manual is not clear enough for me.


    Thanks.

    Turn off power and pull the card and make sure Fanuc actually assembled it. I had that problem and they didn't bother screwing the CP1604 daughterboard to the main board. It fell off when I pulled it out.


    Another time I had a dead board, and had to RMA it to Fanuc.

    Check out the Fanuc position converter I wrote here! Now open source!

    Check out my example Fanuc Ethernet/IP Explicit Messaging program here!

    Yeah, the connector is there for if you want to keep the network online if the robot is powered off. Otherwise the card gets its power internally.


    Another question would be if you have the profinet option installed on the

    Check out the Fanuc position converter I wrote here! Now open source!

    Check out my example Fanuc Ethernet/IP Explicit Messaging program here!

Advertising from our partners