Hey,
We just got new Fanuc R-2000iC/210L Robots with R-30iB plus controller. When creating a program, it will only let me use letters when naming a program. How do I enable the use of numbers and symbols as well?
How to enable numbers into Program name - Fanuc
- josephtoftjr
- Thread is Unresolved
-
HawkME
Moved the thread from forum General Discussion of Industrial Robots Only to forum Fanuc Robot Forum. -
You can use letters, numbers, and underscore. But it must start with a letter.
-
I've been seeing some people who like to begin all of their created program names with underscores so they all grouped together in the program screen. Not a fan but whatever.
-
I've been seeing some people who like to begin all of their created program names with underscores so they all grouped together in the program screen. Not a fan but whatever.
Collections are a solution to that.
-
Set
$SCR.$TPENBLEOVRDto 100 and it will let you run at a 100% in teach.Edit: Wrong var. See my response below.
-
I can't confirm on a real robot, but it is present on v9.30 of Handlingtool.
-
try changing it in a controlled start
-
My mistake. Should be $SCR.$RUNOVLIM.
-
My mistake. Should be $SCR.$RUNOVLIM.
Yup, that's definitely the one. It defaults to 50 on a new software load or straight from the factory. It's usually one of the first things I change.
$SCR.$TPENBLEOVRD is what the override gets set to when you enable the teach pendant.
Advertising from our partners
