NX100 Ethernet functionality experience

    Does anyone have experience on NX100 ethernet functionalities, what there is and what possibilities it has?


    I enabled ethernet option since it was not in use and found three ports open when did basic network setup configuration:


    135 ?? used for what in this NX100 case?

    21 FTP based on what I have been reading, can use this to download/upload jobs?

    23 Telnet is used for what?



    I read theres port 80 for running http based commands and to query status but have not got this port open or found right feature to enable.


    If I toggle pendant to "Remote" I see NX100 being in "I/O" mode but no more ports have been coming available.


    Cannot post NX100 software version because not close to it at the moment.



    And so that people know, this NX100 is not doing production work

    Looks like I'm constantly coming across this note:

    """

    Refer to "3 Ethernet Function Setting" in "NX100 OPTIONS INSTRUCTIONS FOR ETHER-

    NET FUNCTION" for the details.

    """


    I cannot find this specific OPTIONS INSTRUCTIONS manual anywhere, even from Motoman media download site.

    I have Pseudo Input Signal System view remote features enabled, RS parameters set based on FTP and Ethernet Server Function manual instructions but clearly something is still missing.


    FTP is rejecting any user account -> closing connection. Telnet port 23 opens but currently nothing happens but based on documentation I should be expecting port 80 for control which is not open at all yet after many parameters change tries.


    System software version is: NS4.14.00A

Advertising from our partners