KRC1 CABINET WITH KRC2 ROBOT

    Hello guys, how you doing?

    Quick question, there is a way to make a KRC1 Cabinet work with a KRC2 robot? Changing the RDW or something like that? If it is possible can you guys explain it to me step by step?

    I will attach some pictures of the equipment we have. The tag on the KRC1 Cabinet is busted, so theres no way to read it.

    I can't attach anymore pictores, so the robot we have is a KRC2 KR 200-4.

    cabinet has backup label inside, on the right wall. in case of KRC1 you need to open door, then unlatch and swing out frame with safety circuit etc.

    i am aware of and have some some conversions where older robot is connected to newer controller but not the other way around. not sure if it is worth the hassle as external connections are different so new cable set is needed. but even if RDC and cables are sorted out, still need to get correct MADA. does your KSS have MADA for new arm?

    1) read pinned topic: READ FIRST...

    2) if you have an issue with robot, post question in the correct forum section... do NOT contact me directly

    3) read 1 and 2

Advertising from our partners