Hi everyone. Long time observer here but now I'm starting work on a project I would like to ask peoples opinions on this subject.
I have a Fanuc M10-iD robot which we are going to be using for a machine tending application. We have specced it with ethernet Ip (on Fanucs advice). We have a machine tool that has 24V hardwire IO. Fanuc assure us that communicating between the two should be very simple. They have suggested a Wago module. I was wondering if people have any thoughts on the simplest way to go about this? We do not need any HMi at this time so it is purely communicating IO signals.
Many thanks in advance.
I have learnt so much in the last few months from this forum. It is a great source of information!