I can't turn off the servo with the deadman button.
I didn't press the deadman button, but turn on servo.
The servo is always on.
Please help me solve it....
nx100. I didn't press the deadman button, but turn on servo.
-
nx100 user -
January 14, 2021 at 2:22 AM -
Thread is Resolved
-
What generation of controller? There is a connection called FORCE on the the MXT or equivalent depending on generation.
-
What generation of controller? There is a connection called FORCE on the the MXT or equivalent depending on generation.
NX100 / MOTOMAN-SSF2000
TYPE : ERCR–EA1400N–AA00
Could you please tell me how to fix it??
-
Duh, read the big letter that say NX100 at the top.
What generation of controller?
Look on the MTX board if there is a set of jumpers between 13 and 14, 15 and 16. Remove them if they are there. If not post again.
-
Duh, read the big letter that say NX100 at the top.
Look on the MTX board if there is a set of jumpers between 13 and 14, 15 and 16. Remove them if they are there. If not post again.
I found it thanks to you.
Thank you very much.
Advertising from our partners
