nx100. I didn't press the deadman button, but turn on servo.



    I can't turn off the servo with the deadman button.

    I didn't press the deadman button, but turn on servo.

    The servo is always on.

    Please help me solve it....

    What generation of controller? There is a connection called FORCE on the the MXT or equivalent depending on generation.

    I know a thing or two, because I’ve seen a thing or two. Don't even ask about a third thing. I won't know it.

    Thumbs Up 1

    Duh, read the big letter that say NX100 at the top.

    Quote from 95devils

    What generation of controller?

    Look on the MTX board if there is a set of jumpers between 13 and 14, 15 and 16. Remove them if they are there. If not post again.

    I know a thing or two, because I’ve seen a thing or two. Don't even ask about a third thing. I won't know it.

    Thumbs Up 1
    Quote from 95devils

    Duh, read the big letter that say NX100 at the top.

    Look on the MTX board if there is a set of jumpers between 13 and 14, 15 and 16. Remove them if they are there. If not post again.


    I found it thanks to you.

    Thank you very much.

Advertising from our partners