Hi
I did finish my first kuka project which was about packing and palletising cardboard and overall I'm quite surprised of how kuka works ( quite open and mainly DIY). I did not expect kuka to work like this to be honest but like every robotics brand, it has pros and cons. I still considered myself as new in kuka.
I did acquired kukaSimpro which is awesome and surprisingly not laggy at all compare to other simulation software. Yeah my PC is not made for those simulation:). I was able to make the simulation of the futur project.
With kukaSimpro , we also get kuka officeLite and I have few questions about it, and as you might expected, I wanna transfer that simulation into OL.
Despite my research I do not find any tutorial/manual of how to link officeLite to SimPro/WorkVisual.
All officeLite manuals are about how to install officeLite (which was useful considering you need to use VirtualMachine).
could I have any information about the link between OL and SP/WoV.
and What about kuka sim Pro, what kind of information can I extract from that simulation (config. dat , program ...)
one last word : my boss is convinced that we can make a tremendous work before we acquire the robot with officeLite. Basically programming everything is advanced and barely check some moves where the robot is installed.
But from what I have read, the fonctionnality of OfficeLite is pretty limited...
thank for your responds