Hello, all,
Do anyone know is it possible to configure group output with more than 16 bits?
Maximum group IN/OUT
- Vadimas
- Thread is Unresolved
-
No, 16 bits is the max.
-
Hi Vadimas,
I believe it is in your hands.
you can check the value befor writing to GO...
best regards
PnsStarter
-
One of my peers in another department uses two groups to generate a 5 digit number. One group gives a 3 digit number. The second group gives a two digit number which is then multiplied by 1000 and added to the first group to arrive at a 5 digit number that can go to 99999.
-
If you are just needing to pass a numeric value (not needing to access it at the bit level) then forget GI/O and just use a numeric register. It is a 32 bit value.
-
If that's all you need to do then why not just send a DO to the PLC based on that number by using a BG program?
(Granted I don't completely understand what you're trying to accomplish)
-
Do you have any comm options such as EthernetIP?
-
So can you not send a 32 bit register value over profinet?
-
Crossposting: 32bit to 2 16bit
Maybe it's possible to make some program which will split 32 bit value to 2 or 4 values with 16 bit
Advertising from our partners
