I have an Image backup file from a robotic arm at work that I want to load onto roboguide. Is this at all possible or do I need a different type of backup?
Upload Image backup on roboguid
-
Ant.Espo.87 -
November 27, 2020 at 6:11 PM -
Thread is Unresolved
-
-
In theory, Robobuide can create a cell from an image backup if the real robot performed an auto backup at least one time. But this method never worked for me.
My preferred way to go is create a cell from an All of Above (AoA) backup.
-
1.New Cell
------------------
1.1 Process Selection
1.2 Workcell Name
Create a robot from a file backup << select
You can use a backup image.
-
To clarify the terms:
AoA: backup files via-Menu - Files - Backup - All of above There are stored many files like .sv/.tp/.dt .....
Image Backup: Those image files FROMxx.IMG/SRAMxx.IMG created via -Menu - Files - Backup - next - image Backup - or controlled/cold start
I can't create a station from Image. RG only accepts backdate.dt as starting point for a new station.