Greetings.
How reliable is the information on this screen?
This info is from a 4 year old Robot that pretty much works 24/7 for at least 310 days a year.
Is it really possible that I will have to change the J1 reducer in around 2 - 3 years?
J1 Reducer Life Diagnosis at 61.9%
-
M_Benton -
November 25, 2020 at 7:00 AM -
Thread is Unresolved
-
Wow, I looked at a few of my robots that are several years old and the reducer % was all less than 1%.
Do you have the correct payload settings?
-
I am wondering how accurate this "diagnosis/reducer" screen is as well.
I have a 6 year old LR Mate 200 iD 7L that shows J1 = 368.3% and I get a MOTN-171 overload warning.
J2 = 60.1%
J3 = 15.8%
J4 = 0.0%
J5 = 4.4%
J6 = 19.9%
Then I have another LR Mate 7L that is about 8 years old and I see this:
J1 0.0% 25856 hours
J2 0.0% 80000.0 hour over
J3 0.0% 80000.0 hour over
J4 0.0% 80000.0 hour over
J5 0.0% 80000.0 hour over
J6 0.0% 80000.0 hour over
So how accurate are these L10 screens?
Should I reset these screens?
-
So how accurate are these L10 screens?
Should I reset these screens?
HI
HOW WOULD YOU RESET THE SCREENS?
Advertising from our partners
