Hello everyone,
i have a KRC2 running KSS 5.4,
i previously installed a profibus card IBS PCI SC/RI-LK
and i was using two cascaded IBS RL 24 DIO 8/8/8-LK-2MBD as remote I/O blocks,
i was able back then, really simply, to setup the iosys.ini by assigning
2 input bytes and 2 output bytes, this way:
Decommenting INTERBUSPCI=15
Adding in the [INTERBUSPCI] section
INB7=0
INB8=1
OUTB17=0
OUTB18=1
also setting the ibspci1.ini file by deactivating Slavering and activating Masterring, this way:
SLAVERING=0
MASTERRING=1
The system worked flawlessy.
Now i have to replace the I/O system,
so i removed the two external IBS RL 24 DIO 8/8/8-LK-2MBD
and i have to add a din mount I/O block with 16 digital inputs and no outputs.
In details i have here now in my hands a Phoenix Contact Inline Station composed of:
IBS IL 24 BK-LK-2MBD + IB IL 24 PWR IN + IB IL 24 DI 16
As configuration, i just removed the 2 output bytes from the iosys.ini file;
but KSS gives me this error: 8020 InterBus: bus error 1.?
And at the coupler module FO1 is off and FO2 is on
also D LED blinks at 0.5Hz on the Input module.
Reading the ibus.log file i can see the last line reporting
Open read data length (IO: 16 <-> Bus: 144)
So, anyone knows if i have to configure something more advanced?
Thank you